1.
Workshop Door Opened
2.
Workshop Door Closed
3.
Toolbox Opened
4.
Toolbox Closed
5.
Tools Removed From Box and Put on Bench
6.
Hand Drill Removed From Toolbox
7.
Spanner Removed From Toolbox
8.
Screwdriver Removed From Toolbox
9.
Chisel Hammered With Mallet
10.
Chisel Hammered and Wood Levered Up
11.
Chisel Hammered From Smashed Door Pane
12.
Tack Nail Hammered 1
13.
Tack Nail Hammered 2
14.
Tack Nail Hammered 3
15.
Large Tack Nail Hammered
16.
Tack Miss-Hit Twice and Then Hammered In
17.
Floor Nail Hammered (Slow Rhythm with Hammer Ring)
18.
Floor Nail Hammered (Faster Rhythm with Hammer Ring)
19.
Floor Nail Hammered (Changing Rhythm with Hammer Ring)
20.
Small Nails Dropped on Bench
21.
Small Nails Dropped on Bench, One Falls on Metal Surface
22.
Tenon Saw, Small Piece of Wood (Steady Rhythm)
23.
Tenon Saw, Small Piece of Wood (Variable Rhythm)
24.
Tenon Saw, Small Piece of Wood (Close Perspective)
25.
Hand Saw Through Sheet of Plywood (Saw Jams)
26.
Hacksaw, Small Piece of Formica
27.
Hacksaw, Small Piece of Formica (cut Piece Falls on Floor)
28.
Hacksaw, Piece of Metal Cut Piece Falls on Floor
29.
File, Wood
30.
File, Formica (with Squealing on Some Strokes)
31.
File, Metal
32.
Planing Piece of Wood
33.
Sanding, Small Piece of Wood
34.
Sanding, Paper Folded Then Small Piece of Wood
35.
Sanding, Paper Folded Then Sheet of Plywood
36.
Sanding, Edge of Plywood
37.
Sanding, Sheet of Metal
38.
Chiselling Wood (Splintering Noise)
39.
Nail Pulled 1
40.
Nail Pulled 2
41.
Nail Pulled 3
42.
Nail Pulled 4
43.
Hood Levered With Chisel, Splinters
44.
Chisel Sharpened on Grindstone
45.
Hand Drill, Two Holes in Wood
46.
Hand Drill, Single Hole in Wood
47.
Hand Drill, Single Hole in Metal
48.
Hand Drill, Single Hole in Metal, Jams, Is Freed
49.
Small Spanner Dropped
50.
Large Spanner Dropped
51.
Painting, Brush
52.
Painting, Roller
53.
Can of Spray Paint, Shaken
54.
Spray Painting
55.
Engine Hoist Assembled (Metal Clattering Noise)
56.
Electric Drill, Short Burst Freewheeling
57.
Electric Drill, Single Hole in Wood
58.
Electric Drill, Single Hole in Wood, Jams, Is Freed
59.
Electric Drill, Single Hole in Metal Sheet
60.
Electric Drill, Single Hole in Thick Metal Bar
61.
Electric Drill, Rotary Sanding Attachment Used
62.
Electric Jigsaw, Small Piece of Wood
63.
Electric Jigsaw, Plywood Sheet
64.
Electric Grinder Freewheels
65.
Electric Grinder, Short Burst on Metal Sheet
66.
Electric Grinder, Long Bursts on Metal Sheet
67.
Pressure Hose, Cleaning Yard
68.
Arc Welding Machine, Switch On, Transformer Hum
69.
Arc Welding Machine, Switch On, Lose Arc, Restrike
70.
Arc Welding Machine, Switch On, Weld, Off
71.
Arc Welding Machine, Switch On, Strike Arc Second Attempt
72.
Arc Welding Machine, Switch On, Attempt to Strike Arc, Fail
73.
Gas Blowlamp Lit, Constant Roar of Flame, Off
74.
Gas Blowlamp Lit, Used to Heat Surface (Changing acoustic)
75.
Anvil, Metal Hammered Hard by Blacksmith (Last Stroke)
76.
Pneumatic Drill Used on Tarmac
77.
General Atmosphere on Building Site, Mid Distant Acoustic
78.
General Atmosphere on Building Site, Closer Perspective
79.
Building Site, Interior Acoustic of Building Under Construction
80.
Building Site, Hammering Steel Girders (Close Perspective)
81.
Building Site, Concrete Aerator Used to Remove Air Bubbles